Bob Smith Bob Smith's Profile Page

Bob Smith Bob Smith

0 Course Enrolled • 0 Course Completed

Biography

New JN0-683 Learning Materials - Practice JN0-683 Test Engine

P.S. Free 2025 Juniper JN0-683 dumps are available on Google Drive shared by VerifiedDumps: https://drive.google.com/open?id=1LxWq3mMN6FDLUIqmAjhYZBJ79ED9oMu0

The JN0-683 Exam Questions is of the highest quality, and it enables participants to pass the JN0-683 exam on their first try. For successful preparation, it is essential to have good JN0-683 exam dumps and to prepare questions that may come up in the exam. VerifiedDumps helps candidates overcome all the difficulties they may encounter in their exam preparation. To ensure the candidates' satisfaction, VerifiedDumps has a support team that is available 24/7 to assist with a wide range of issues.

In this version, you don't need an active internet connection to use the JN0-683 practice test software. This software mimics the style of real test so that users find out pattern of the real test and kill the exam anxiety. VerifiedDumps offline practice exam is customizable and users can change questions and duration of Data Center, Professional (JNCIP-DC) (JN0-683) mock tests. All the given practice questions in the desktop software are identical to the Data Center, Professional (JNCIP-DC) (JN0-683) actual test.

>> New JN0-683 Learning Materials <<

Free PDF Quiz Juniper - Trustable New JN0-683 Learning Materials

When you purchase our JN0-683 exam materials, we have installed the most advanced operation machines in our website. If you buy the JN0-683 practice test on our web, and after purchasing, it only takes 5 to 10 minutes before our operation system sending our JN0-683 Study Materials to your email address, that is to say, with our advanced operation system of our JN0-683 study guide, there is nothing that you need to worry about, we can ensure you the fastest delivery on the JN0-683 training guide.

Juniper JN0-683 Exam Syllabus Topics:

Topic
Details

Topic 1

VXLAN: This part requires knowledge of VXLAN, particularly how the control plane manages communication between devices, while the data plane handles traffic flow. Demonstrate knowledge of how to configure, Monitor, or Troubleshoot VXLAN.

Topic 2

EVPN-VXLAN Signaling: This section assesses an understanding of Ethernet VPN (EVPN) concepts, including route types, multicast handling, and Multiprotocol BGP (MBGP). It also covers EVPN architectures like CRB and ERB, MAC learning, and symmetric routing.

Topic 3

Data Center Deployment and Management: This section assesses the expertise of data center networking professionals like architects and engineers, focusing on key deployment concepts. Topics include Zero-touch provisioning (ZTP), which automates device setup in data centers without manual input.

Topic 4

Data Center Multitenancy and Security: This section tests knowledge of single-tenant and multitenant data center setups. Candidates such as Data Center Professionals are evaluated on ensuring tenant traffic isolation at both Layer 2 and Layer 3 levels in shared infrastructure environments.

Juniper Data Center, Professional (JNCIP-DC) Sample Questions (Q20-Q25):

NEW QUESTION # 20
Which statement is correct about a collapsed fabric EVPN-VXLAN architecture?

A. Border gateway functions occur on border leaf devices.
B. Using Virtual Chassis at the leaf layer increases resiliency.
C. It supports multiple vendors in the fabric as long as all the spine devices are Juniper devices deployed with L2 VTEPs
D. Fully meshed back-to-back links are needed between the spine devices.

Answer: A

Explanation:
* Collapsed Fabric Architecture:
* A collapsed fabric refers to a simplified architecture where the spine and leaf roles are combined, often reducing the number of devices and links required.
* In this architecture, the spine typically handles core switching, while leaf switches handle both access and distribution roles.
* Understanding Border Gateway Functionality:
* Border gateway functions include connecting the data center to external networks or other data centers.
* In a collapsed fabric, these functions are usually handled at the leaf level, particularly on border leaf devices that manage the ingress and egress of traffic to and from the data center fabric.
* Correct Statement:
* D. Border gateway functions occur on border leaf devices:This is accurate in collapsed fabric architectures, where the border leaf devices take on the role of managing external connections and handling routes to other data centers or the internet.
Data Center References:
* The collapsed fabric model is advantageous in smaller deployments or scenarios where simplicity and cost-effectiveness are prioritized. It reduces complexity by consolidating functions into fewer devices, and the border leaf handles the critical task of interfacing with external networks.
In conclusion, border gateway functions are effectively managed at the leaf layer in collapsed fabric architectures, ensuring that the data center can communicate with external networks seamlessly.

NEW QUESTION # 21
Exhibit.

Both DC and DC2 ate using EVPN-VXLAN technology deployed using an ERB architecture. A server on the Red VLAN must communicate with a server on the Green VLAN. The Blue VLAN in DC and DC2 needs to be the same VLAN.
Which statement is correct in this scenario?

A. A lean super spine device must be added to DC and DC2; all VLANs must be stretched to the lean super spine device and the lean super spine devices must stitch all the VLANs together.
B. An interconnect is required between the four SRX Series devices; the Blue VLAN must be stretched and a transit VNI must be added for the Red and Green VLANs.
C. An interconnect is required between four leaf devices in the services blocks; the Red VLAN and the Green VLAN must be stitched and the Blue VLAN must be stretched.
D. The eight spine devices must be configured as border spine devices; a full mush interconnect must exist between all eight spine devices and the Blue VLAN must be stitched together

Answer: B

Explanation:
* ERB Architecture in EVPN-VXLAN:
* ERB (Edge Routed Bridging) architecture is commonly used in data center networks where routing decisions are made at the network edge (leaf or border devices), while bridging (Layer 2 forwarding) is extended across the fabric. This architecture allows for efficient L3 routing while still enabling L2 services like VLANs to span across multiple locations.
* VLAN and VNI Configuration:
* The scenario specifies that a server on the Red VLAN needs to communicate with a server on the Green VLAN. Since these VLANs are in different data centers (DC and DC2), and given the use of EVPN-VXLAN, the communication between these VLANs will require atransit VNI(Virtual Network Identifier). This transit VNI will allow traffic to traverse the VXLAN tunnel across the DCI (Data Center Interconnect).
* Interconnect between SRX Series Devices:
* The exhibit shows SRX Series Chassis Clusters used as service devices (likely for firewalling or other security services). These devices need to be interconnected between the two data centers to ensure that VLANs can communicate effectively. The Blue VLAN needs to be stretched between DC and DC2 to maintain the same Layer 2 domain across both data centers.
Conclusion:
* Option B:Correct-Interconnecting the SRX Series devices will ensure the necessary service chaining, while stretching the Blue VLAN and adding a transit VNI for the Red and Green VLANs will enable the required communication across the data centers.

NEW QUESTION # 22
Exhibit.

Referring to the exhibit, which statement Is true?

A. A CRB architecture is being used.
B. An OTT architecture is being used.
C. A PBB-EVPN architecture is being used.
D. An ERB architecture is being used.

Answer: D

Explanation:
* Understanding Network Architectures:
* ERB (Edge Routed Bridging) architecture involves routing at the network's edge (leaf nodes), while traffic between leaf nodes is switched. This is commonly used in VXLAN-EVPN setups.
* Analysis of the Exhibit:
* The exhibit shows configurations related to routing instances, VXLAN, and VLANs, with VNIs being used for each VLAN. This setup is characteristic of an ERB architecture where each leaf device handles Layer 3 routing for its connected devices.
Conclusion:
* Option B:Correct-The configuration shown corresponds to an ERB architecture where routing occurs at the network's edge (leaf devices).

NEW QUESTION # 23
You are deploying an IP fabric using EBGP and notice that your leaf devices areadvertising and receiving all the routes. However, the routes are not installed in the routing table and are marked as hidden.
Which two statements describe how to solve the issue? (Choose two.)

A. You need to configure as-override.
B. You need to configure a next-hop self policy.
C. You need to configure multipath multiple-as.
D. You need to configure loops 2.

Answer: B,C

NEW QUESTION # 24
Exhibit.

Referring to the exhibit, the spinel device has an underlay BGP group that is configured to peer with its neighbors' directly connected interfaces. Which two statements are true in this scenario? (Choose two.)

A. Load balancing for the underlay is not configured correctly.
B. Load balancing for the underlay is configured correctly.
C. The multihop statement is not required to establish the underlay BGP sessions.
D. The multihop statement is required to establish the underlay BGP sessions.

Answer: B,C

Explanation:
* Understanding BGP Configuration in the Exhibit:
* The exhibit shows a BGP configuration on spine1 with a group named underlay, configured to peer with directly connected interfaces of other devices in the network.
* Multipath multiple-as:This statement allows the router to install multiple paths in the routing table for routes learned from different ASes, facilitating load balancing.
* Key Statements:
* A. The multihop statement is not required to establish the underlay BGP sessions:In this case, the BGP peers are directly connected (as indicated by their neighbor IP addresses), so the multihop statement is unnecessary. Multihop is typically used when BGP peers are not directly connected and packets need to traverse multiple hops.
* D. Load balancing for the underlay is configured correctly:The multipath { multiple-as; } statement in the configuration enables load balancing across multiple paths from different autonomous systems, which is appropriate for underlay networks in data center fabrics.
* Incorrect Statements:
* C. The multihop statement is required to establish the underlay BGP sessions:This is incorrect because the peers are directly connected, making the multihop statement unnecessary.
* B. Load balancing for the underlay is not configured correctly:This is incorrect because the configuration includes the necessary multipath settings for load balancing.
Data Center References:
* BGP configurations in EVPN-VXLAN underlay networks are crucial for ensuring redundancy, load balancing, and efficient route propagation across the data center fabric.

NEW QUESTION # 25
......

People is faced with many unknown factors and is also surrounded by unknown temptations in the future. Therefore, we must lay a solid foundation for my own future when we are young. Are you ready? VerifiedDumps Juniper JN0-683 practice test is the best. Just for the exam simulations, you will find it will be useful to actual test. More information, please look up our Juniper JN0-683 free demo. After you purchase our products, we offer an excellent after-sales service.

Practice JN0-683 Test Engine: https://www.verifieddumps.com/JN0-683-valid-exam-braindumps.html

BTW, DOWNLOAD part of VerifiedDumps JN0-683 dumps from Cloud Storage: https://drive.google.com/open?id=1LxWq3mMN6FDLUIqmAjhYZBJ79ED9oMu0